Netscaler Gateway X1 theme 46 Comments

What I like when I access my virtual desktops and applications is consistency thought different systems, front web and UI... Citrix have try with the green bubble theme to bring this but that wasn't really a success due to this "not very good looking" theme :)

Netscaler 10.5 and Storefront 2.5.2 Configuration 13 Comments

Citrix Netscaler 10.5 is out since a couple of weeks now, and if you want to read what's new about this new release just click on the [link] because there are so many things I won't list everything here. I will use this blog to refresh the "how to" I already did about Netscaler and I will go through the basic setup, certificate request, import and Access Gateway configuration to plug my XenDesktop 7.5 lab. First, you need to download your Netscaler (download if you're using a VPX appliance). You can find the appliance corresponding to your hypervizor : vmware ESX Microsoft Hyper-V Citrix XenServer KVM You can download it here : [link] - myCitrix account is required One you boot up the appliance, after give the basic information like IP address, subnet and getway, you can fireup the GUI through your favorite browser. You need to logon and follow the step by step screenshots : The basic configuration is done. now time to add a certificate for the Access Gateway, creating a private key, a CSR and finally importing the pem certificate.   Don't forget to change the nsroot password. Now the certificate part is done (thanks to Digicert for my lab) you can go ahead to the next step and configure your Strorefront server to create a new store ready to connect with the Netscaler Access Gateway. Storefront part is easy and quick to do, you can now continue by creating the Access Gateway using the new wizard and following these steps : Here you go, just a reboot to have the Access Gateway up and running. I had few issue in the end with Application Firewall with Google Chrome and Safari from a Mac OSx computer, you need to enable the learning mode to check what need to be change in Application Firewall rules and allow connexion to you Access Gateway. You can customize the Netscaler Access Gateway logon page and your Storefront very easily, Eric one of my CTP friends did a very short and nice blog about that [link] and a very detailed blog written by Feng Huang Citrite here [link] This blog will give you a good overview on what needs to be done to set up an Access Gateway with Storefront, for those who don't have time to make test, now you know !

Citrix Storefront 2.1 vs WebInterface 37 Comments

The 2.1 version of Strorefront came along with XenDesktop 7.1. There are few changes in this version comparing to the previous one and on the internal architecture of Storefront Services nothing new (reminder) : So with Storefront 2.1 out since few weeks not, many people requested an updated version of my side by side comparison between the WebInterface and StoreFront, so here it is. As always, comments are welcome and sharing your experience might be useful for the others !  

Citrix XenDesktop 7 – Installation 14 Comments

XenDesktop 7 is now available with different features and entitlements (link) and yes there is a lot to read on this webpage but most of everything is already known features. So I will just write now what I read between the line : No more Citrix Streaming Application (RIP) in favor of Microsoft APP-V XenServer is now version 6.2 and Open Source ! http://www.xenserver.org/ Seamless Local Apps is now official and build-in. PVS is version 7 now and MCS continue its evolution. (I'll come back later on a blog post about that) Edgesight is included in XenDesktop 7 (Another blog post subject) Storefront is now version 2 Receiver for Windows is v4 Windows 8 and Windows 2012 supported Many other changes I need to cover later on Several editions are available today : Now this is time to show you how the installation process, pretty straight forward as I already mention and this is for those who are curious about this new version and don't have tie to POC it or try it right away.   To download Citrix XenDesktop 7, this is the way -> [link] XenDesktop 7 Edocs : [link] XenDesktop 7 Admin Guide : [link] XenDesktop 7 Upgrade Guide : [link] XenDesktop 7 Install Guide : [link]

Citrix Storefront 2 (Preview) vs WebInterface 50 Comments

A new version of Strorefront is coming along with XenDesktop 7. There are a lot of change in this version comparing to the previous one but first here is a quick internal architecture of Storefront Services : What have changed with Storefront ? No more external database HTML5 Client improved Desktop Appliance Site Session pre-launch (for XenApp 6.5) International language support IPV6 Integrated smart card authentication Auth SDK Integrated with XenDesktop 7 Installer Management from Desktop Studio And after few week of test, I must admit this version is much faster then the 1.x versions. The fact Storefront doesn't need a SQL database is a major point on the architecture point, high availability and management side. Here is the installation step screenshots :         And an updated side by side comparison with Citrix WebInterface 5.4 :

Citrix CloudGateway 2.5 – Configuration 14 Comments

One more time for those who won't have time to try another release here is a short and simple blog about Citrix CloudGateway 2.5, you'll be able to read and see accross this blog post different steps and screens to setup the AppControler. New version are coming along with every time as much new features as fixes from the previous releases. This new release, CloudGateway 2.5 is in fact an update of only one component, the AppController (from v2.0 to v2.5). The StoreFront Service remains the same version with v1.2, App Preparation Tool (MDX), Mobile App Management and ShareFile Sync for Receiver have been added to the CloudGateway package. And CloudGateway is now CloudGateway Enterprise. What's new : Administration Enhancements Email Provisioning file Basic Workflow Management AppController w/ShareFile Storage Zones Policies for Web/SaaS/Mobile apps Me@Work mobile apps (@WorkMail and @WorkWeb) Mobile Device Management Receiver for Windows VPN Integration AGEE UI Customization To read the full list of all the new features go here : [link] Initial Configuration After importing the application (Esx or XenServer), through the console or remote ssh access (if you enabled it) you can : Check System Date Check System Disk Usage Current used space Displays space available Toggle SSH Access To access same console menu via SSH No root access to the file system Reset Certificate Generates a self-signed certificate and becomes active Restart / Shutdown AppController The default and password are administrator/password, a prompt will appear when connecting the web ui for the first time to change it. Once the network configuration is done, the UI can be accessed with a browser : https://AppControlleripaddress:4443/ControlPoint/ Using the default login and password, a wizard appear to configure the appliance : Once you login again with the new password you define for the administrator, the brand new web UI looks very neat Then we can add role using the Role tab:   Now we can add/create applications and applications categories by using the Apps & Docs tab, to create new categories :   And to add Applications :   Adding Web Link Apps is as simple as that :   ShareFile configuration : Using a browser to navigate the AppController url will now present all the Apps configured above :   The blog serie : Citrix CloudGateway 2.5 - Configuration Citrix CloudGateway 2.5 - MDX Citrix CloudGateway 2.5 - ShareFile Citrix CloudGateway 2.5 - Access Gateway (Netscaler) Citrix CloudGateway…