Netscaler 10.5 and Storefront 2.5.2 Configuration 13 Comments

Citrix Netscaler 10.5 is out since a couple of weeks now, and if you want to read what's new about this new release just click on the [link] because there are so many things I won't list everything here. I will use this blog to refresh the "how to" I already did about Netscaler and I will go through the basic setup, certificate request, import and Access Gateway configuration to plug my XenDesktop 7.5 lab. First, you need to download your Netscaler (download if you're using a VPX appliance). You can find the appliance corresponding to your hypervizor : vmware ESX Microsoft Hyper-V Citrix XenServer KVM You can download it here : [link] - myCitrix account is required One you boot up the appliance, after give the basic information like IP address, subnet and getway, you can fireup the GUI through your favorite browser. You need to logon and follow the step by step screenshots : The basic configuration is done. now time to add a certificate for the Access Gateway, creating a private key, a CSR and finally importing the pem certificate.   Don't forget to change the nsroot password. Now the certificate part is done (thanks to Digicert for my lab) you can go ahead to the next step and configure your Strorefront server to create a new store ready to connect with the Netscaler Access Gateway. Storefront part is easy and quick to do, you can now continue by creating the Access Gateway using the new wizard and following these steps : Here you go, just a reboot to have the Access Gateway up and running. I had few issue in the end with Application Firewall with Google Chrome and Safari from a Mac OSx computer, you need to enable the learning mode to check what need to be change in Application Firewall rules and allow connexion to you Access Gateway. You can customize the Netscaler Access Gateway logon page and your Storefront very easily, Eric one of my CTP friends did a very short and nice blog about that [link] and a very detailed blog written by Feng Huang Citrite here [link] This blog will give you a good overview on what needs to be done to set up an Access Gateway with Storefront, for those who don't have time to make test, now you know !

Cloudify my lab with Windows Azure 13 Comments

As I got an unlimited access to Windows Azure I wanted to check out how I could extend my lab into it and use it to store VMs workload (at first). Here what you need : Citrix NetScaler VPX (tested with NS10.1: Build 122.17.nc & NS10.1: Build 123.9.nc) Windows Azure Access Homelab (running on vSphere 5.5) Of course, you need licence for everything... Considerations : Before configuring a CloudBridge tunnel between a CloudBridge appliance in datacenter and  Microsoft Azure, consider the following points: The CloudBridge appliance must have a public facing IPv4 address (type SNIP) to use as a tunnel end-point address for the CloudBridge tunnel. Also, the CloudBridge appliance should not be behind a NAT device. (or you'll have to setup a route for your LAN computers, I'm explaining how to at the end of this blog) Azure supports the following IPSec settings for a CloudBridge tunnel. Therefore, you must specify the same IPSec settings while configuring the CloudBridge appliance for the CloudBridge tunnel. IKE version = v1 Encryption algorithm = AES Hash algorithm = HMAC SHA1  You must configure the firewall in the datacenter edge to allow the following. Any UDP packets for port 500 Any UDP packets for port 4500 Any ESP (IP protocol number 50) packets IKE re-keying, which is renegotiation of new cryptographic keys between the CloudBridge tunnel end points to establish new SAs, is not supported. When the Security Associations  (SAs) expire, the tunnel goes into the DOWN state. Therefore, you must set a very large value for the lifetimes of SAs. You must configure Microsoft Azure before specifying the tunnel configuration on the CloudBridge appliance, because the public IP address of the Azure end (gateway) of the tunnel, and the PSK, are automatically generated when you set up the tunnel configuration in Azure. You need this information for specifying the tunnel configuration on the CloudBridge appliance. First thing first, you need to use your Windows Azure account and follow the next step to begin to configure the IPSec tunnel by creating a local network In the left pane, click NETWORKS. In the lower left-hand corner of the screen, click + NEW. In the NEW navigation pane, click NETWORK, then click VIRTUAL NETWORK, and then click ADD LOCAL NETWORK. In the ADD A LOCAL NETWORK wizard, in the specify your local network details screen, set the following parameters: NAME  VPN DEVICE IP ADDRESS In the lower right corner of the screen,…

myCitrix Synergy Barcelona 2012 4 Comments
">

This year wasn't as surprising as it has been in the past years on the innovation and "really new stuff". Perhaps this is is because since I'm a CTP I know a lot more on Citrix plan before the announce it but I think the evolution Citrix brings into their product now will still take a year to go and be released and ready to go. Some announces are old already, many things have been announced at Citrix Synergy in San Francisco and many announces made were about products already available since couple of months. Anyway, here is my wrap up so far : ByteMobile is now part of Citrix, acquisition in july (Official Announcement here) over 6 billion mobile devices growing 50%+ mobile data is video & multimedia growth - 25x over the next 5 years This acquisition brings Citrix cloud networking convergence with mobile data a bit further. XenServer The general availability of the 6.1 released has been made one month ago (Official Announcement here) and the major features are : live storage migration batch conversion of vmware vms Citrix Cloudplatform integration XenClient XenClient Enterprise 4.5 is available now for ultrabook and after Citrix other acquisition this year (Virtual Computer) advanced set of features are coming along with this new realease : Broader hardware compatibility XenClient Enterprise is now localized VLAN tagging support External network access to Synchronizer via Citrix NetScaler SSL bridging SSL offload Windows 8 guest OS Native Windows experience A new display architecture Dual external monitors in a docking station 30% improvement in hypervisor boot time VM export support A Citrix community blog post detail every new feature released here : [click] Partnership with Microsoft is going the same weird way as it has always been :) Some numbers and information have been given during the keynote : 80% growth XenDesktop on Hyper-v Windows server 2012 with Hyper-v Improved vm density with hyper-v Windows 8 support native UI design & platform support + GoToMeeting GoToMypc ShareFile and AppDNA are supporting the new Microsoft Operating System as well Citrix Receiver for Windows 8 early release on Windows Store Here is some screenshot :   GoToMeeting HD faces now on iPad With this new release it's now possible to present with an iPad. You can also create meeting direclty from the iPad   Podio Updates and improvement to extend the work between meeting (team and customers) integration…

Citrix Synergy San Francisco 2012 highlights 7 Comments

Every year I cross half of the planet to go over the United States in San Francisco to attend Citrix Synergy event. This is every time very exciting, meeting new people, friends, geeks and of course doing some business. This year was different as I didn't had time to go to all the session I planned to attend due to an heavy but very pleasant schedule with CTPs. I had time to attend the keynotes and see what Citrix was ready to unleash for this major virtualization event, I will sum up everything that I think are the key points for the future of our job. The main topic of keynote since two years ago is the Cloud, Personal, Private or Public, the Cloud is everywhere; look I even put an upper case when I write Cloud :) GoTo products : GoToAssist have reach 50M sessions, translated to 15 languages with a  fastest time to service. GoToAssist for iPad and now for Android are available for free. You can download the Android app here :  [here] The mobile workstyle with GoToMeeting to work with anyone anywhere across any device gets HD faces available on iPad today. Wyse : After Wyse Xenith (zero client ) Wyse announced Xentih 2 [link] which is (supposed) to be  40% faster, more secure, true 720P with multi-monitor support. Of course no one missed the fact Wyse has been acquired by Dell [link] HP : HP announce one of the coolest hardware during this Synergy, the HP t410 All-in-one, System on a chip, HDX ready and PoE (Power over Ethernet) consuming only 13watt, this is cool for a 18,5 inch screen. If you don't use PoE, you can still use a regular power cord. This is not a revolution but an evolution, this zero client screen have a price, 429$ Specifications : [link] Citrix VDI-in-a-Box Now with a full HDX experience, and scale like lego block. What's really new is you can upgrade from VDI-in-a-Box to XenDesktop licenses. Citrix VDI-in-a-Box won the best of Interrop Award 2012 in cloud computing and virtualization category [link] Dell DVS simplified powered by VDI-in-a-Box appear to be a good solution for SMB who need fast deployment [link]   AppDNA AppDNA introduce new features / module like physical to virtual transition,  Windows OS and browser upgrades with a new version released v6.1 [link]   Citrix XenClient, acquisition of Virtual Computer Virtual…

Part 1/3 Synergy Barcelona 2011 – Personal Cloud 1/3 Part 2/3 Synergy Barcelona 2011 – Private Cloud 2/3 Part 3/3 Synergy Barcelona 2011 – Public Cloud 3/3 Public Cloud The last cloud of 3 (Personal Cloud, Private Cloud and Public Cloud) has been announced to be used in a very easy way, the same way as the creation of a GMail or a Hotmail email account. The way to make this easy connection available is Citrix CloudBridge, this product allow you to connect your datacenter to any cloud with full transparency, security and performance. Citrix CloudBridge will run on network layer 2 and 3 to provide fast and secure IP transaction. The beta version will arrive soon, no more information for now. And then another new product (maybe more like a new NetScaler feature) Citrix NetScaler CloudConnectors will secure the connection all the way down to the client devices has been announced but no release date yet. About what we need to build a cloud, Mark Templeton underline we will soon need to all being ready to build, connect Cloud Infrastructures and Cloud Providers. Most of the enterprise are doing server virtualization ++ built for traditional enterprise apps & client-server compute including a traditional management, then enterprises will need to move on cloud platforms designed around big data, massive scale & next-gen cloud apps with an autonomic management and an open, value added stack. This is where Citrix CloudPortal will enter the game, a layer on to of CloudStack. Citrix vision for the future is 3 clouds, Personal Cloud to empower people, Private Cloud to aggregate and deliver apps and data, Public Cloud to build and connect infrastructures. The 3 PCs. Citrix clearly claims to be the number one partner you need to think when you want to cloudify you network, application, data and devices. And want to lead the new IT to impact the business needs. This is it, I had to live my Synergy remotely from Paris, and this are all the information I could get from Synergy Live and Twitter. Next step will be to digest, analyze and put everything together. I think we have enough new material to play until next Synergy. Part 1/3 Synergy Barcelona 2011 – Personal Cloud 1/3 Part 2/3 Synergy Barcelona 2011 – Private Cloud 2/3 Part 3/3 Synergy Barcelona 2011 – Public Cloud 3/3